nylon paper

英 [ˈnaɪlɒn ˈpeɪpə(r)] 美 [ˈnaɪlɑːn ˈpeɪpər]

网络  尼龙纸; 尼龙薄膜

化学



双语例句

  1. This series of machine is suitable for materials including: riband, cotton tape, rubber tape, nylon tape, paper tape and adhesive tape.
    透明纸胶带有什么不行?本系列机械适应材料:丝带、棉带、胶带、尼龙带、纸带、不干胶带等卷装带类。
  2. The machine is suitable for laying off leather, plastic, rubber, nylon, paper board.
    本机适用于皮革、塑胶、橡胶、尼龙、纸板、合成材料等非金属类之下料。
  3. For urogenital schistosomiasis, a filtration technique using nylon, paper or polycarbonate filters is the standard.
    为诊断尿路血吸虫病,可采用过滤技术,使用尼龙、纸或聚碳酸酯滤器。
  4. Characterised by its strength and elasticity, dragline silk is six times stronger than nylon and steel fibre of the same diameter, the paper said.
    报道说,这种蜘蛛丝的强度和弹性非常高,在同样的直径下,蜘蛛丝的强度是尼龙丝和钢纤维的6倍。
  5. The interface shear stress and fracture energy of nylon fiber-rubber composites at different temperatures were also discussed in the paper.
    同时,通过计算分析了不同温度下尼龙纤维-橡胶复合材料界面粘附剪切力和界面破坏能的变化。
  6. Through simulations on abated effect of nylon and plastic nets with different structure on wind-blown sand in wind tunnel, the aim of this paper is to provide a theoretic base for optimized design of blown sand engineering in the field and a new sand-defending material application.
    通过不同结构的尼龙网和塑料网对风沙流减弱作用的风洞实验研究,旨在为探求各种防沙新材料的防护功能,并为防沙新材料的开发、野外工程防沙的优化设计及其应用提供理论依据。
  7. Objective To research the possible detected period of α-amylase in saliva stains on nylon, gauze and filter paper in different temperature.
    目的探讨不同温度条件下尼龙织物、纱布和滤纸唾液斑淀粉酶的可测期限。
  8. The ways of fermentation with anaerobic microbe, nylon bag, raising and some of nutrition techniques were used in this paper to study the effect of fermentation on cottonseed-hull.
    本研究采用微生物发酵法、尼龙袋法和饲养试验等方法和技术,对棉籽壳的发酵脱毒效果进行了研究,并进行了生产条件下的发酵试验,测定其在生产状态下的发酵效果;
  9. The development of preparation of barrier nylon resins abroad and their barrier properties, processibility, as well as applications are introduced in this paper.
    本文综述了国外阻隔尼龙树脂的研制进展,阻隔尼龙树脂的阻隔性能,加工性能及其应用。
  10. Effect of components of elastomer-resorcinol formaldehyde resin based adhesive and thicknesses of adhesive layer and curing presures on bonding NBR to Nylon fabric was described in this paper.
    本文叙述了弹性体&间苯二酚甲醛树脂胶粘剂的组成,胶粘剂涂层厚度以及固化压力对丁腈橡胶与尼龙织物粘接的影响。
  11. The consumption, synthesis technology, application and development of en-gineering plastics ( including Nylon, PC, PET, Polyoxymethylene and modified PPO/ PPE) are given in thes paper.
    本文对工程塑料(包括尼龙、聚碳酸酯、热塑性聚酯、聚甲醛、改性聚苯醚)的开发近况作了较详细的介绍。
  12. Nanocomposite of Nylon 6/ attapulgite was prepared by in-site polymerization after purifying and activating the attapulgite in this paper.
    对凹凸棒土进行纯化和活化后,用原位聚合方法合成了纳米级尼龙6/凹凸棒土复合材料。
  13. The Synthesis, characteristics and analysis of thermodynamics and applications prospects of montmorillonites/ nylon 6 nano-composites with melt extrusion are reviewed in this paper.
    介绍了熔体挤出法蒙脱石/尼龙6纳米复合材料制备、性能、影响因素及应用前景。
  14. Based on production actuality of Nylon 6 HOY, how to set spinning temperature to adapt the change of chip's viscosity, chip grain fineness and screw extrude volume was discussed in this paper.
    根据锦纶6HOY的生产实践就纺丝温度的设定如何适应切片粘度、切片粒度和螺杆挤出量的变化进行了探讨。
  15. The overseas latest progress in the field of super toughened Nylon-6 has been introduced in this paper, The primary contents and development status of the theoretical study on the toughing mechanism of Nylon-6 also have been reviewed.
    介绍了国外在尼龙6超韧化改性研究领域中的最新进展,主要介绍几种尼龙6共混物及其增韧的机理。
  16. The desing of the single-cavity injection mold with hot runner, the calculation of heating power and the process test for the production of nylon 1010 caps are given in this paper.
    本文介绍尼龙1010圆盒盖单浇口热流道注塑模外热式热喷嘴的结构设计、加热功率计算及工艺试验。
  17. Based on the structure characteristics of a nylon yarn brushing machine, the paper introduces manufacturing and debugging of mainframe, its applying in the production.
    介绍了尼龙刷倒角机的结构特点,叙述了主机的研制、调试及在生产中的应用。
  18. Dynamic mechanical property of nylon composite reinforced with bamboo fiber was analyzed in this paper.
    对竹纤维增强尼龙复合材料动态机械性能进行研究。
  19. The isothermal crystallization behaviors of nylon 1010 with different molecular weights were studied by DSC in this paper. Within the studied temperature scope, the isothermal crystallization behavior of nylon 1010 can be described by Avrami equation.
    用示差扫描量热法(DSC)研究了3种不同分子量的尼龙1010样品的等温结晶行为,在所研究的温度范围内,尼龙1010的等温结晶过程符合Avrami方程。
  20. The polyaniline ( PANI)/ short glass fiber composites and the polyaniline/ short nylon fiber composites were prepared by in-situ polymerization in this paper. Both of them as a new type of reinforcing agent were mixed with NR by mechanical mixing called SFRC.
    本文通过原位聚合的方法制备了聚苯胺/玻璃纤维复合材料、聚苯胺/尼龙纤维复合材料,作为天然橡胶的新型增强材料,并利用机械混炼法制备短纤维增强天然橡胶复合材料(SFRC)。